Let your number spend a year on the fridge door.
A business card lives in a drawer; a magnet lives in plain sight. 67 × 46 mm, 4-colour offset on 40 micron magnetic sheet, gloss laminated and cut — 1 000 pieces.
- 40 micron magnetic sheet, gloss laminated
- Oval or your own cut shape
- Cutting and lamination included
Why a magnet?
It gets kept, not binned
A flyer is read once and thrown away; a magnet goes on the fridge. For the same budget you buy a year of being looked at instead of a single glance.
It sits where the number gets looked up
Takeaway, removals, plumbing, the vet — in trades where people reach for a number while standing in the kitchen, a magnet is the shortest route to being called.
One run, one price
Plate, print, lamination and cutting are all in the figure you see. There is no extra line at the end; the run price is the price.
Fridge Magnet Printing Prices
Each figure is for the whole run: 40 micron magnetic sheet, 4-colour print, gloss lamination and cutting. The per-piece figure is derived from the run price.
| Cut | Size | Quantity | Run Price | Per Piece |
|---|---|---|---|---|
| Oval Cut Offset Print | 67 × 46 mm | 1000 pieces | ₺2,000.00 | ₺2.00 |
| Custom Cut Offset Print | 67 × 46 mm | 1000 pieces | ₺2,400.00 | ₺2.40 |
Prices exclude VAT. Shipping is calculated separately.
How It Works
Prepare your file
A single-page PDF at 67 × 46 mm with 2 mm of bleed all round. For a custom cut, include the cut line as well.
Upload it and pick the cut
The oval is cut with the shop's standing die. A custom cut has a die made from the path in your file.
Pay for the run
The cart shows the whole run. Pay by card and your job joins the print queue.
We print and ship
We print, laminate, cut and send it out within 4–6 business days on a tracked courier.
File Requirements
A magnet is die-cut, so the bleed is real. Get these three numbers right and your file prints without a conversation.
- Oval Cut
- 67 × 46 mm · 2 mm all round
- Custom Cut
- 67 × 46 mm · 2 mm all round
- Resolution
- 300 DPI, CMYK
- File format
- Single-page PDF, up to 30 MB
Keep type and logos at least 4 mm inside the cut line — cutting is the least forgiving step in this job.
Frequently Asked Questions
What is the difference between an oval and a custom cut?
The oval is cut with the shop's existing die, so there is no tooling to pay for and it costs less. A custom cut follows a shape you choose, and a die is made for it — on 1 000 pieces that difference is ₺400.
What does my file need for a custom cut?
Add the outline you want cut as a spot colour named CutContour. It is not printed; it only tells the die where to cut. Without it we will either run the job as an oval or come back to you for a new file.
Can I order fewer than 1 000?
Not at the moment — 1 000 is the run we are quoted. Most of a magnet's cost is the die and the make-ready, and that is the same at 200 pieces, so a short run stops making sense per magnet. For larger runs, write to us and we will get a price.
Is the back printed too?
No. The back is the magnetic face and it sits against the fridge. Printing is one side, and the price is quoted that way.
I do not have a design — can you help?
For now this product only accepts print-ready files. A template-filling design step is being built. In the meantime write to us and we will point you at someone who can draw it.
How long does it take?
Once your file is approved, printing, laminating and cutting take 4–6 business days, plus courier time. You get a tracking number by email when it ships.