Roll-Up Banner Order
Upload your print-ready file, see it on the stand, choose how many you need.
How will you send us the design?
Drag your PDF here, or choose one
A single-page, print-ready PDF — up to 64 MB.
85 × 200 cm, no bleed. The bottom 6 cm stays inside the cassette — keep anything that matters out of it.
Uploading…
Uploaded file
Page one of your file. This is what goes to press.
Your file placed on the 85 × 200 cm face. The strips swallowed by the top rail and the cassette are missing here as well — if something is gone from the mockup, it will be gone on the stand. Colours are lit for the render; judge colour on the flat preview.
Your file was received. This server could not render a PDF preview; your file is checked by hand before printing.
File check
If you made the design in Canva, Figma or Google Drive there is nothing to export: paste the share link here and we will prepare the print-ready file for you.
Leave the link open to view
Set sharing to "anyone with the link can view". Skip that step and we cannot open it, and your order waits. You do not need to give edit access.
Your order is placed straight away. We prepare the file and check it before printing; if anything is wrong we will write to you.
File Requirements
- Print size
- 85 × 200 cm
- Bleed
- Resolution
- 100–150 DPI at final size (or 300 DPI at 1/10 scale), CMYK
Build the file at 85 × 200 cm with no bleed. The bottom 6 cm sits inside the cassette and the top 2 cm under the rail; keep the logo, the phone number and the address clear of both. Leave 3 cm at the sides as well — and remember that anything far below eye level goes unread anyway.